PMSA-600
The plate vibration test kit allows visual observation of the mode shape directly at the natural frequency, so that the natural frequency of the structure and the corresponding vibration mode can be understood and the strength of vibration (displacement sensitivity) changes depending on the location of the structure. You will also learn the ability to find solutions to severe vibrations caused by resonance.
Detailed Description
• Visual observation of the mode shape of the plate at natural frequencies
• Comparison of natural frequencies and measured natural frequencies
• Observation of nodal line at natural frequency
• Training for vibration problem solution
• Various supporting methods of the plate
• Comparison of natural frequencies and measured natural frequencies
• Observation of nodal line at natural frequency
• Training for vibration problem solution
• Various supporting methods of the plate
• Study of dynamic behavior of various shape of steel plate: rectangular, disk, triangular
• Natural frequency and mode shape measurements
• Observe mode shapes at each natural frequency
• Observe the vibration sensitivity on the structure
• Learn resonance vibration solution
• Natural frequency measurement using random excitation
• Frequency response measurement using sinusoidal sweep
• Built-in power amplifier for external signal
• FRF measurement using frequency analyzer
• Natural frequency and mode shape measurements
• Observe mode shapes at each natural frequency
• Observe the vibration sensitivity on the structure
• Learn resonance vibration solution
• Natural frequency measurement using random excitation
• Frequency response measurement using sinusoidal sweep
• Built-in power amplifier for external signal
• FRF measurement using frequency analyzer
Electromagnetic Shaker WSK-40 | |
Rated force | Sine : 40N, Random noise: 35N |
Frequency range | 5Hz – 5000Hz |
Rated current | 3.5A |
Nominal impedance | 4Ω |
Effective mass of amateur | 150 gram |
Max. acceleration | Sine: 200m/s2, Random: 100m/s2 |
Max. velocity | 1.5m/s |
Max. displacement | 10mm Pk-Pk |
Power Amplifier WPA-1100 | |
No of channels | 2 channels |
RMS Power | 100W x2 max. 200W x 2 (2W load) |
Min. coil impedance | 2W |
THD | 0.01% |
Frequency range | 10Hz – 20kHz |
Signal Generator GFG-8020H | |
Wave | SINE, TRIANGLE, SQUARE, TTL Pulse & CMOS Ouptput |
Amplitude | >20Vp-p (Open voltage ) >10Vp-p (50Ω Load) |
Impedance | 50Ω±10% |
Display | 4 digit LED Display |
Frequency range | 0.2Hz – 2MHz 7 Steps |
Supply voltage | AC100V/120V/220V/230V±10%, 50/60Hz |
Environmental and physical characteristics | |
Power consumption | Less than 200W |
Ambient temperature | 0~50°C |
Size | 1800(W) x 900(D) x 1600(H)mm |
Weight | 100 kg (including testing material) |